IPnom Home • Manuals • FreeBSD

 FreeBSD Man Pages

Man Sections:Commands (1)System Calls (2)Library Functions (3)Device Drivers (4)File Formats (5)Miscellaneous (7)System Utilities (8)
Keyword Live Search (10 results max):
 Type in part of a command in the search box.



       bzip2, bunzip2 - a block-sorting file compressor, v1.0.2
       bzcat - decompresses files to stdout
       bzip2recover - recovers data from damaged bzip2 files


       bzip2 [ -cdfkqstvzVL123456789 ] [ filenames ...	]
       bunzip2 [ -fkvsVL ] [ filenames ...  ]
       bzcat [ -s ] [ filenames ...  ]
       bzip2recover filename


       bzip2  compresses  files  using	the Burrows-Wheeler block sorting text
       compression algorithm, and Huffman coding.   Compression  is  generally
       considerably   better   than   that   achieved	by  more  conventional
       LZ77/LZ78-based compressors, and approaches the performance of the  PPM
       family of statistical compressors.

       The  command-line options are deliberately very similar to those of GNU
       gzip, but they are not identical.

       bzip2 expects a list of file names to accompany the command-line flags.
       Each  file is replaced by a compressed version of itself, with the name
       "original_name.bz2".  Each compressed file has  the  same  modification
       date,  permissions,  and, when possible, ownership as the corresponding
       original, so that these properties can be correctly restored at	decom-
       pression  time.	File name handling is naive in the sense that there is
       no mechanism for preserving original file  names,  permissions,	owner-
       ships  or dates in filesystems which lack these concepts, or have seri-
       ous file name length restrictions, such as MS-DOS.

       bzip2 and bunzip2 will by default not overwrite existing files.	If you
       want this to happen, specify the -f flag.

       If no file names are specified, bzip2 compresses from standard input to
       standard output.  In this case, bzip2 will decline to write  compressed
       output  to  a  terminal, as this would be entirely incomprehensible and
       therefore pointless.

       bunzip2 (or bzip2 -d) decompresses all specified  files.   Files  which
       were  not  created by bzip2 will be detected and ignored, and a warning
       issued.	bzip2 attempts to guess the filename for the decompressed file
       from that of the compressed file as follows:

	      filename.bz2    becomes	filename
	      filename.bz     becomes	filename
	      filename.tbz2   becomes	filename.tar
	      filename.tbz    becomes	filename.tar
	      anyothername    becomes	anyothername.out

       If  the	file does not end in one of the recognised endings, .bz2, .bz,
       .tbz2 or .tbz, bzip2 complains that it cannot guess  the  name  of  the
       original file, and uses the original name with .out appended.

       You  can  also  compress  or decompress files to the standard output by
       giving the -c flag.  Multiple files may be compressed and  decompressed
       like this.  The resulting outputs are fed sequentially to stdout.  Com-
       pression of multiple files in this manner generates a stream containing
       multiple  compressed file representations.  Such a stream can be decom-
       pressed correctly only by bzip2 version 0.9.0 or later.	 Earlier  ver-
       sions  of  bzip2  will  stop  after decompressing the first file in the

       bzcat (or bzip2 -dc) decompresses all specified files to  the  standard

       bzip2  will  read  arguments  from  the environment variables BZIP2 and
       BZIP, in that order, and will process them before  any  arguments  read
       from  the  command line.  This gives a convenient way to supply default

       Compression is  always  performed,  even  if  the  compressed  file  is
       slightly  larger  than the original.  Files of less than about one hun-
       dred bytes tend to get larger, since the compression  mechanism	has  a
       constant  overhead  in  the region of 50 bytes.	Random data (including
       the output of most file compressors) is coded at about  8.05  bits  per
       byte, giving an expansion of around 0.5%.

       As  a  self-check  for  your protection, bzip2 uses 32-bit CRCs to make
       sure that the decompressed version of a file is identical to the origi-
       nal.   This  guards  against  corruption  of  the  compressed data, and
       against undetected  bugs  in  bzip2  (hopefully	very  unlikely).   The
       chances	of  data corruption going undetected is microscopic, about one
       chance in four billion for each file processed.	Be aware, though, that
       the check occurs upon decompression, so it can only tell you that some-
       thing is wrong.	It can't help you recover  the	original  uncompressed
       data.   You  can  use  bzip2recover to try to recover data from damaged

       Return values: 0 for a normal exit, 1 for environmental problems  (file
       not found, invalid flags, I/O errors, &c), 2 to indicate a corrupt com-
       pressed file, 3 for an  internal  consistency  error  (eg,  bug)  which
       caused bzip2 to panic.


       -c --stdout
	      Compress or decompress to standard output.

       -d --decompress
	      Force  decompression.   bzip2,  bunzip2 and bzcat are really the
	      same program, and the decision about what  actions  to  take  is
	      done  on	the  basis of which name is used.  This flag overrides
	      that mechanism, and forces bzip2 to decompress.

       -z --compress
	      The complement to -d:  forces  compression,  regardless  of  the
	      invocation name.

       -t --test
	      Check  integrity	of the specified file(s), but don't decompress
	      bzip2 normally declines to decompress files which don't have the
	      correct magic header bytes.  If forced (-f),  however,  it  will
	      pass  such  files  through  unmodified.	This  is  how GNU gzip

       -k --keep
	      Keep (don't delete) input files during compression or decompres-

       -s --small
	      Reduce memory usage, for compression, decompression and testing.
	      Files are decompressed and tested  using	a  modified  algorithm
	      which  only  requires  2.5 bytes per block byte.	This means any
	      file can be decompressed in 2300k of  memory,  albeit  at  about
	      half the normal speed.

	      During  compression, -s selects a block size of 200k, which lim-
	      its memory use to around the same figure, at the expense of your
	      compression  ratio.   In short, if your machine is low on memory
	      (8 megabytes or less), use -s for everything.  See  MEMORY  MAN-
	      AGEMENT below.

       -q --quiet
	      Suppress non-essential warning messages.	Messages pertaining to
	      I/O errors and other critical events will not be suppressed.

       -v --verbose
	      Verbose mode -- show the compression ratio for  each  file  pro-
	      cessed.	Further -v's increase the verbosity level, spewing out
	      lots of information which is primarily of interest for  diagnos-
	      tic purposes.

       -L --license -V --version
	      Display the software version, license terms and conditions.

       -1 (or --fast) to -9 (or --best)
	      Set  the	block size to 100 k, 200 k ..  900 k when compressing.
	      Has no effect when decompressing.  See MEMORY MANAGEMENT	below.
	      The --fast and --best aliases are primarily for GNU gzip compat-
	      ibility.	In particular, --fast  doesn't	make  things  signifi-
	      cantly faster.  And --best merely selects the default behaviour.

       --     Treats all subsequent arguments as  file	names,	even  if  they
	      start  with  a dash.  This is so you can handle files with names
	      beginning with a dash, for example: bzip2 -- -myfilename.

       --repetitive-fast --repetitive-best
	      These flags are redundant in versions  0.9.5  and  above.   They
	      provided	some  coarse control over the behaviour of the sorting
	      algorithm in  earlier  versions,	which  was  sometimes  useful.
	      0.9.5  and  above have an improved algorithm which renders these
	      flags irrelevant.


       bzip2 compresses large files in blocks.	The block  size  affects  both
       the  compression  ratio	achieved,  and the amount of memory needed for
       compression and decompression.  The flags -1  through  -9  specify  the

	      Compression:   400k + ( 8 x block size )

	      Decompression: 100k + ( 4 x block size ), or
			     100k + ( 2.5 x block size )

       Larger  block sizes give rapidly diminishing marginal returns.  Most of
       the compression comes from the first two or three hundred  k  of  block
       size,  a fact worth bearing in mind when using bzip2 on small machines.
       It is also  important  to  appreciate  that  the  decompression	memory
       requirement is set at compression time by the choice of block size.

       For  files  compressed  with  the default 900k block size, bunzip2 will
       require about 3700 kbytes to decompress.  To support  decompression  of
       any  file  on a 4 megabyte machine, bunzip2 has an option to decompress
       using approximately half this amount  of  memory,  about  2300  kbytes.
       Decompression  speed is also halved, so you should use this option only
       where necessary.  The relevant flag is -s.

       In general, try and use	the  largest  block  size  memory  constraints
       allow,  since that maximises the compression achieved.  Compression and
       decompression speed are virtually unaffected by block size.

       Another significant point applies to files which fit in a single  block
       -- that means most files you'd encounter using a large block size.  The
       amount of real memory touched is proportional to the size of the  file,
       since  the  file  is  smaller than a block.  For example, compressing a
       file 20,000 bytes long with the flag -9 will cause  the	compressor  to
       allocate  around 7600k of memory, but only touch 400k + 20000 * 8 = 560
       kbytes of it.  Similarly, the decompressor will allocate 3700k but only
       touch 100k + 20000 * 4 = 180 kbytes.

       Here is a table which summarises the maximum memory usage for different
       block sizes.  Also recorded is the total compressed size for  14  files
       of the Calgary Text Compression Corpus totalling 3,141,622 bytes.  This
       column gives some feel for how  compression  varies  with  block  size.
       These  figures  tend  to understate the advantage of larger block sizes
       for larger files, since the Corpus is dominated by smaller files.

		  Compress   Decompress   Decompress   Corpus
	   Flag     usage      usage	   -s usage	Size

	    -1	    1200k	500k	     350k      914704
	    -2	    2000k	900k	     600k      877703
	    -3	    2800k      1300k	     850k      860338
	    -4	    3600k      1700k	    1100k      846899
	    -5	    4400k      2100k	    1350k      845160
	    -6	    5200k      2500k	    1600k      838626
	    -7	    6100k      2900k	    1850k      834096
	    -8	    6800k      3300k	    2100k      828642
	    -9	    7600k      3700k	    2350k      828642


       bzip2 compresses files in blocks, usually 900kbytes long.   Each  block
       is  handled  independently.   If a media or transmission error causes a
       multi-block .bz2 file to become damaged, it may be possible to  recover
       in  .bz2  files,  and write each block out into its own .bz2 file.  You
       can then use bzip2 -t to test the integrity of the resulting files, and
       decompress those which are undamaged.

       bzip2recover takes a single argument, the name of the damaged file, and
       writes a number of files "rec00001file.bz2",  "rec00002file.bz2",  etc,
       containing   the   extracted   blocks.	The   output   filenames   are
       designed  so  that the use of wildcards in subsequent processing -- for
       example,  "bzip2  -dc   rec*file.bz2 > recovered_data" -- processes the
       files in the correct order.

       bzip2recover should be of most use dealing with large .bz2  files,   as
       these will contain many blocks.	It is clearly futile to use it on dam-
       aged single-block  files,  since  a damaged  block  cannot   be	recov-
       ered.   If  you	wish to minimise any potential data loss through media
       or  transmission errors, you might consider compressing with a  smaller
       block size.


       The  sorting  phase  of compression gathers together similar strings in
       the file.  Because of this, files containing very long runs of repeated
       symbols,  like "aabaabaabaab ..."  (repeated several hundred times) may
       compress more slowly than normal.  Versions 0.9.5 and above  fare  much
       better  than  previous  versions  in  this  respect.  The ratio between
       worst-case and average-case compression time is in the region of  10:1.
       For  previous  versions,  this figure was more like 100:1.  You can use
       the -vvvv option to monitor progress in great detail, if you want.

       Decompression speed is unaffected by these phenomena.

       bzip2 usually allocates several megabytes of memory to operate in,  and
       then  charges  all over it in a fairly random fashion.  This means that
       performance, both for compressing and decompressing, is largely	deter-
       mined  by  the  speed  at  which your machine can service cache misses.
       Because of this, small changes to the code to reduce the miss rate have
       been  observed  to  give  disproportionately large performance improve-
       ments.  I imagine bzip2 will perform best on machines with  very  large


       I/O  error  messages  are not as helpful as they could be.  bzip2 tries
       hard to detect I/O errors and exit cleanly, but the details of what the
       problem is sometimes seem rather misleading.

       This  manual  page pertains to version 1.0.2 of bzip2.  Compressed data
       created by this version is entirely forwards and  backwards  compatible
       with the previous public releases, versions 0.1pl2, 0.9.0, 0.9.5, 1.0.0
       and 1.0.1, but with the following exception: 0.9.0 and above  can  cor-
       rectly  decompress multiple concatenated compressed files.  0.1pl2 can-
       not do this; it will stop after decompressing just the  first  file  in
       the stream.

       bzip2recover versions prior to this one, 1.0.2, used 32-bit integers to
       represent bit positions in compressed files, so	it  could  not	handle
       compressed files more than 512 megabytes long.  Version 1.0.2 and above
       uses 64-bit ints on some platforms which support  them  (GNU  supported


       Julian Seward, jseward@acm.org.


       The ideas embodied in bzip2 are due to (at least) the following people:
       Michael	Burrows  and  David Wheeler (for the block sorting transforma-
       tion), David Wheeler (again, for the Huffman coder), Peter Fenwick (for
       the  structured	coding	model  in  the original bzip, and many refine-
       ments), and Alistair Moffat, Radford  Neal  and	Ian  Witten  (for  the
       arithmetic  coder  in the original bzip).  I am much indebted for their
       help, support and advice.  See the manual in  the  source  distribution
       for pointers to sources of documentation.  Christian von Roques encour-
       aged me to look for faster sorting algorithms, so as to speed  up  com-
       pression.  Bela Lubkin encouraged me to improve the worst-case compres-
       sion performance.  The bz* scripts are derived from those of GNU  gzip.
       Many  people  sent  patches,  helped  with  portability	problems, lent
       machines, gave advice and were generally helpful.



Man(1) output converted with man2html , sed , awk