Legato NetWorker Commands Index:ansrd
* - Windows Only
mini_elssi - StorageTek silo interface module (Unix only) mini_el - event logger for use with ssi (Unix only) libstlstk - shared library for communication to ssi
ssi [ ACSLS server ] [ socket ] [ retry count ] & mini_el [ -l logfile ] [ -d ] [ -h ] & libstlstk.so (Solaris) libstlstk.so.a (AIX) libstlstk.sl (HPUX) libstlstk.so.1 (SGI) libstlstk.so.1 (DYNIX/ptx) libstlstk.so (DECAXP) libstlstk.dll (NT i386)
NOTE: in this document, the term "ACSLS server" will be used to indicate the name of the system that is running any one of StorageTek's library manager programs: ACSLS on a Solaris or AIX host, Library Station on an MVS host, or Horizon Library Manager on a system running Windows NT or Windows 2000. (Unix only) The ssi command is used indirectly by nsrjb to communicate with an ACSLS server. nsrjb loads libstlstk, which handles the TCP calls to and from ssi. ssi then handles all of communication to and from the ACSLS server. Starting with ACSLS version 5.3, it is possible to run NetWorker (either a server or a storage node) on the same host that ACSLS is running on. ssi and mini_el must be running on the system on which jbconfig was run to create the jukebox resource. ssi and mini_el are almost always run as background processes, and are usually started automatically by the system. In addition to ssi and mini_el, a shared library file (usually called libstlstk.xxx where xxx is an operating system-dependent extension) is also required. An appropriate version of this library is installed as part of NetWorker. New in version 1.06 of ssi: ssi now supports communication to more than one ACSLS server at any given time. Previous versions of ssi were limited to a fixed TCP port for communication with NetWorker, and hence were limited to having only one instance running at a time. In version 1.06, ssi and libstlstk have an added private communication channel that lets libstlstk ask any of the running ssi instances which ACSLS server it is connecting to, and to select the proper ssi for the current NetWorker silo. To make it easier to set up a configuration with the possibilility of many ssi processes running, the command line for ssi has changed. While you can still start ssi the same way as before - using the allowed range will be selected. If the port number is not specified, each successive instance of ssi will take the next available port starting from 50004 and going upwards. If there are no available ports in the range, ssi will fail to load and should display an error message. Note that specifying the port number is not necessary for normal operation. You do not need to insure that a given ACSLS server is always accessed over a given port. NetWorker and ssi use the name of the ACSLS server to establish a connection on the fly. If there is not a hostname specified on the ssi command line, before ssi is started, one environment variable MUST be set: CSI_HOSTNAME must be set to the name of the library server. If this variable is not found, ssi will exit with an error message. mini_el is an event logger used by ssi to maintain a log of certain events. It should be started before ssi. Multiple instances of ssi will share a single instance of mini_el. A header consisting of the ACSLS server name and the local TCP port that ssi will be listening on is included at the start of any message placed into the log by any instance of ssi (NT only) On NT, the software equivalent to ssi and mini_el must be obtained from StorageTek as their product "Library Attach for NT". This package must be installed prior to configuring a Silo in NetWorker. NOTE: Library Attach version 1.1 includes a portmapper function that will only install properly if the NetWorker services are not running. You should use Control Panel to stop the "NetWorker Backup and Recover Server" and the "NetWorker Remote Exec Service" before installing Library Attach. After Library Attach is installed, you should use Control Panel to start "NetWorker Remote Exec Service" and "NetWorker Backup and Recover Server". NOTE: Since Legato does not supply "Library Attach for NT", we are unable to add the multiple ACSLS host functionality to our NT version of NetWorker. (All platforms) libstlstk.xxx is a shared library that handles the communication between nsrjb and ssi or Library Attach. ssi or Library Attach then handles the communication over the network to the library server (either ACSLS, Library Station or Horizon Library Manager). There are no options, parameters or environment variables that affect the operation of libstlstk. The correct path to this file should be entered when an STK silo is configured using jbconfig. The default values specified by jbconfig match the default locations chosen for the installation program, and in most cases can be accepted.
mini_el -l logfile Specifies the filename of the logfile to be created by mini_el. The default value is /nsr/logs/ssi_event.log. If present, logfile must be the complete path to the logfile. If the file does not exist, it will be created. If the file does
ssi ACSLS server is required if the CSI_HOSTNAME environment variable has not been set to the name of the system running ACSLS, LibraryStation or Horizon. socket is only required if you need to specify the socket used for communication between NetWorker and ssi retry count is only required if you need to increase the retry count for communication between ssi and the ACSLS server due to network problems. These parameters are not position sensitive. The command line code in ssi uses the value of the parameter to decide which of the three acceptable parameters any given command line parameter actually is: If the input parameter evaluates to zero using the atoi function, then it is assumed to be the ACSLS server name. Only the first parameter that evaluates to zero will be used as the server hostname. If the parameter evaluates to a number between 50004 and 50100, then it is assumed to be the socket value to be used. All parameters that fit this case will be saved as the socket value, so the last matching parameter on the command line will be the one actually used. If a parameter evaluates to a number between 1 and 500, then it is assumed to be the retry count. As with the socket parameter, the last matching parameter on the command line wins. Any parameter that falls outside of these cases will simply be ignored.
ssi CSI_HOSTNAME (text, up to 256 chars, there is no default) If an ACSLS server name is not found on the command line, ssi will use the hostname specified by this variable. It is limited to 256 characters, and should simply be the hostname running the library server program that you are trying to connect to. If neither the command line hostname nor this environment variable specify a hostname for ssi to use, ssi will exit with an error message. SSI_HOSTNAME (text, up to 256 chars, there is no default) This variable is intended for use on multi-homed systems. Normally, ssi uses the gethostbyname system function to determine the name to use for this side of the connection to the ACSLS server. On a system with several network interfaces, the name supplied by that function may not result in the use of the network interface needed to communicate with the ACSLS server. On these systems, you can explicitly specify the exact name of the network interface that ssi will use to connect to the ACSLS server. This variable needs to be set before ssi is started, on, this variable specifies the starting number for ssi to use when it needs to open a socket to talk to the ACSLS server. It appears that ssi will only open two sockets if this variable is set. The first, at SSI_BASE_SOCKET, will be used to connect to any host. The second, at SSI_BASE_SOCKET + 1, will be used for direct communication to the ACSLS server. Note that there will still be the default sockets at 50001 and 50004 used to communicate between mini_el and ssi, but any communication between this host and the ACSLS server should occur using the two sockets starting at SSI_BASE_SOCKET. TIME_FORMAT (time format string, default = "%m-%d-%y %H:%M:%S") If you wish to see time values printed in a format other than the default of Month-Day-Year Hour:Minute:Seconds, use this variable. %m is replaced by the current month %d is replaced by today's date %y is replaced by the current year %H is replaced by the current hour %M is replaced by the current minute %S is replaced by the current second CSI_CONNECT_AGETIME (seconds, 0 < x < 31536000, default = 600) This will set the number of seconds for network connect aging purposes. CSI_RETRY_TIMEOUT (seconds, 0 < x < ??, default = 4) This will set how long ssi will wait before retrying a network request. CSI_RETRY_TRIES (numeric, 0 < x < 100, default = 5) This will set the number of times ssi will retry sending a network message before reporting an error. CSI_TCP_RPCSERVICE (boolean, default is TRUE) This sets whether ssi will use TCP sockets to connect with the library server. CSI_UDP_RPCSERVICE (boolean, default is FALSE) This sets whether ssi will use UDP sockets to connect with the library server. Setting CSI_UDP_RPCSERVICE to TRUE will allow ssi to communicate with a csi that is running on the same system.
Normal STK silo setup: mini_el & ssi acsls1 & - or - mini_el & setenv CSI_HOSTNAME acsls1 ssi & Connect to 3 different ACSLS servers: mini_el & ssi acsls1 & setenv CSI_HOSTNAME acsls3 ssi & Connect to 3 different ACSLS servers over 3 different network interfaces: mini_el & setenv SSI_HOSTNAME myhost_on_net1 ssi acsls1 & setenv SSI_HOSTNAME myhost_on_net2 ssi acsls2 & setenv SSI_HOSTNAME myhost_on_net3 ssi acsls3 & Connect to ACSLS server on socket 50025 mini_el & ssi acsls1 50025 & - or - setenv CSI_HOSTNAME acsls1 mini_el & ssi 50025 & To have mini_el use /nsr/logs/ssi.log.today as its log file mini_el -l /nsr/logs/ssi.log.today & ssi acsls1 &
/nsr/logs/ssi_event.log default logfile created/appended to by mini_el
Several startup and shutdown messages along with any errors in communi- cation between the NetWorker server and the ACSLS server will be logged in the logfile /nsr/logs/ssi_event.log (or other logfile as specified on the mini_el command line). The messages from any one ssi instance will be preceded by the name of the ACSLS server that that instance will be communicating with plus the local TCP port number that will be used between NetWorker and ssi. For example: 10-12-00 12:31:44 SSI: [devlab-acsls/50004] ONC RPC: csi_init(): Initiation Started source csi_init.c; line 165 10-12-00 12:33:20 SSI: [acsls2/50011] ONC RPC: csi_init(): Initiation Completed ONC RPC: csi_init(): ACSLS server acsls2 accessed through port 50011
ADVERTISEMENTLegato NetWorker 7.x
Man(1) output converted with man2html, sed, awk